性能特點： 1．主機傳動部分：采用AC馬達搭配變頻器作為切卷材料傳動，加減速穩定快速。
2．控制單元：使用可程序控制，同軸中可設定多種尺寸自動轉換切割。
3．操作面板部分：操作接口采用LCD觸控屏10寸，可直接在屏幕上設定各種切卷條件及監控運轉狀況。
4．電機控制系統：控制系統為PLC可程式控制器，同軸中可設定多種尺寸，切割時可根據設定好的尺寸及數量自動調整切割寬度。
5．切卷定位系統：使用三菱伺服馬達控制，高精度滾珠螺杄進行尺寸定位及使用線性滑軌承載刀座定位動作精確平順。
6．進刀定位系統：使用三菱伺服馬達控制進刀方式，可擬人化做三段式速度進刀切卷。提高效率并得到品質。
7．圓刀角度調整：使用三菱伺服馬達計算圓刀角度轉向，因應不同材料做不同角度變化（角度調整范圍±8°）接當切割平面不佳時，可直變換切割角度?？蓽p少換刀次數，提高生產效率。
8．自動換卷裝置：使用氣缸驅動定位齒利用活動花鍵進行傳動保證換卷快速精；同時可以作到不停機換卷，節約停機上下料的停機時間，提高生產效率。
9．快速換軸裝置：本機器有三種切割軸可供選用，采用快速換軸方式，因應不同材料需求。
1. main drive part: AC motor and frequency converter are used to drive the material, and acceleration and deceleration are stable and fast
2. central control unit: programmable central control, which can automatically convert and cut various sizes in the coaxial line
3. operation panel part: the operation interface adopts LCD touch screen 10 inches, which can directly set various cutting conditions and monitor
operation status on the screen
4. motor control system: the central control system is PLC programmable controller, and a variety of dimensions can be set in the coaxial line. The
cutting width can be adjusted automatically according to the set size and quantity.
5. cutting and positioning system: using MITSUBISHI servo motor control, high precision ball screw for size positioning and use of linear sliding rail
bearing knife seat: positioning movement is accurate and smooth.
6. feed positioning system: using MITSUBISHI servo motor to control the feed way, it can be humanized to do three stage speed feed cutting Improve
efficiency and get the best quality.
7. round knife angle adjustment: using MITSUBISHI servo motor to calculate the angle steering of the circular knife, because the different materials
should be changed in different angles(angle adjustment range of 8 degrees), when the cutting plane is not good, it can be straight. Change the cutting
angle. It can reduce the number of changing the knife and improve the production efficiency.
8. automatic winding device: the use of cylinder drive positioning teeth to use the movable spline to drive, ensure the rapid and accurate volume change,
at the same time, can do not stop the machine to change the volume, save the downtime of downtime. Improve production efficiency.
9. quick shaft change device: This machine has three cutting axes to choose from, and adopts quick shaft changing mode to meet different material
requirements
適用范圍： 適用于 BOPP／PVC／PE透明膠帶／紋紙／雙面膠帶／牛皮紙膠帶等之分切。
It is suitable for BOPP/PVC/PE/transparent tape/transparent tape/textured paper/ double-sided tape/ kraft paper.
The tapes are cut and cut.
技術參數： | 機器寬度 | Machine Width | 1.3M 1.6M |
| 切卷直徑 | Max．Cutting O．D | 150mm |
| 切割管芯外徑 | Cutting Core O．D | 1"-3" |
| 最小切卷寬度 | Min．Cutting Width | 1mm |
| 圓刀直徑 | Diameter of Circular Blade | Φ180mm |
QQ:2568841715
大渡口区|
舒城县|
灯塔市|
东港市|
林周县|
灵石县|
昌图县|
南康市|
台州市|
若尔盖县|
临泽县|
武川县|
旬阳县|
崇义县|
临安市|
西贡区|
乌什县|
龙陵县|
儋州市|
竹溪县|
舟山市|
宁南县|
新巴尔虎右旗|
石首市|
长白|
莱阳市|
威信县|
黔东|
亚东县|
兴业县|
穆棱市|
揭阳市|
铁岭市|
永修县|
新竹县|
津市市|
太保市|
会昌县|
商丘市|
马公市|
甘肃省|