食品接觸用塑料材料及制品中2,2,4,4-四甲基-1，3-環丁二醇遷移量的測定
食品接觸用塑料材料及制品中2,2,4,4-四甲基-1，3-環丁二醇遷移量的測定 詳細信息：

名稱：毛細管柱
固定液：聚乙二醇
規格：30m*0.25mm*0.25um
型號：PEG-20M
應用：食品接觸材料及制品 2,2,4,4-四甲基-1,3-環丁二醇遷移量的測定

本文件規定了食品接觸用塑料材料及制品中2,2,4,4-四甲基-1,3-環丁二醇遷移量的測定方法。
本文件適用于食品接觸用塑料材料及制品中2,2,4,4-四甲基-1,3-環丁二醇遷移量的測定。

浩瀚色譜（山東）應用技術開發有限公司建立氣相色譜-質譜法(gas chromatography-mass spectrometry,GC-MS)測定食品接觸材料及制品中2,2,4,4-四甲基-1,3-環丁二醇遷移量的分析方法。方法樣品采用食品模擬物4%乙酸和95%乙醇浸泡。水基模擬物(4%乙酸)經過乙腈萃取,油脂類模擬物(95%乙醇)旋轉蒸干,正己烷定容,用PEG-20M(30 m×0.25 mm,0.25μm)色譜柱分離后,用氣相色譜-質譜法檢測,外標法定量。結果本方法檢出限0.005 mg/kg;在0.1~2.0 mg/L范圍內線性良好,r^2=0.9991;加標濃度為0.1 mg/kg與0.5 mg/kg時,回收率在80.7%~93.7%之間,相對標準偏差(relative standard deviation,RSD)在2.82%~6.22%之間。結論本方法靈敏度高、檢測速度快、準確率高,能用于食品接觸材料及制品中2,2,4,4-四甲基-1,3-環丁二醇遷移量的測定。

食品接觸用塑料材料及制品中2,2,4,4-四甲基-1，3-環丁二醇遷移量的測定  測試譜圖：



Determination of migration of 2,2,4,4-tetramethyl-1,3-cyclobutanediol in plastic materials and products in contact with food

Determination details of migration of 2,2,4,4-tetramethyl-1,3-cyclobutanediol in plastic materials and products in contact with food:



Name: capillary column

Stationary solution: polyethylene glycol

Specification: 30m * 0.25mm * 0.25um

Model: PEG-20M

Application: determination of migration of 2,2,4,4-tetramethyl-1,3-cyclobutanediol in food contact materials and products



This document specifies the determination method of 2,2,4,4-tetramethyl-1,3-cyclobutanediol migration in plastic materials and products used in food contact.

This document is applicable to the determination of migration of 2,2,4,4-tetramethyl-1,3-cyclobutanediol in plastic materials and products used in food contact.



Haohan Chromatography (Shandong) Application Technology Development Co., Ltd. established an analytical method for the determination of the migration of 2,2,4,4-tetramethyl-1,3-cyclobutanediol in food contact materials and products by gas chromatography mass spectrometry (GC-MS). Methods The samples were soaked in food simulant 4% acetic acid and 95% ethanol. The water-based simulant (4% acetic acid) was extracted by acetonitrile, the oil simulant (95% ethanol) was evaporated to dryness by rotation, the volume was fixed by n-hexane, and PEG-20M (30 m × 0.25 mm,0.25 μ m) After the chromatographic column is separated, it is detected by gas chromatography-mass spectrometry and quantified by external standard method. Results The detection limit of this method was 0.005 mg/kg; The linearity is good in the range of 0.1~2.0 mg/L, r ^ 2=0.9991; When the spiking concentration is 0.1 mg/kg and 0.5 mg/kg, the recovery is 80.7%~93.7%, and the relative standard deviation (RSD) is 2.82%~6.22%. Conclusion The method is sensitive, rapid and accurate, and can be used to determine the migration of 2,2,4,4-tetramethyl-1,3-cyclobutanediol in food contact materials and products.



Test spectrogram for determination of migration of 2,2,4,4-tetramethyl-1,3-cyclobutanediol in plastic materials and products in contact with food: