Hawke是專業生產防爆鎧裝電纜接頭的廠家，鎧裝電纜接頭是配套鋼絲鎧裝電纜，鋼帶鎧裝電纜等特殊電纜配套使用的配套鋼絲鎧裝電纜防水接頭，Hawke鋼帶鎧裝電纜防水接頭，用于鎧裝電纜終端接線或進入接線盒或設備時鎖緊鎧裝電纜的。歡迎EPIN公司采購洽談。Hawke廣泛用于核電，石化，采礦等行業，除常規產品外，EPIP還提供其他品牌進口防爆鎧裝電纜防水接頭，通過ATEX認證，EX認證，CE認證等。

Hawke 501/453/Universal Cable Gland（霍克鎧裝防爆電纜接頭）

Application

Outdoor or indoor use.
For use with single wire armour ‘W’, wire braid ‘X’ and steel tape armour ‘ Z’ elastomer and plastic insulated cables.
For particular use with cables that exhibit ‘cold flow’ characteristics.

Features

Provides armour clamping using one clamping arrangement for all armour/braid types.
Provides a diaphragm seal on the cables inner sheath which will not damage cable that has ‘cold flow’ characteristics.
Provides an outer deluge seal to prevent moisture ingress to the cable armour/braid.
Provides a cable retention and low smoke and fume, zero halogen seal onto the cables outer sheath.

Materials & Finishes

The 501/453/Universal cable gland is manufactured in Brass （standard）, Nickel Plated Brass, 316 Stainless Steel or Aluminium.
Brass NPT entries are nickel plated as standard.

Technical Data

Exd IIC Gb, Exe IIC Gb, ExnR IIC Gc, Extb IIIC Db
Baseefa Certificate No. Baseefa06ATEX0057X. For sizes Os - F.
Baseefa Certificate No. Baseefa06ATEX0056X For sizes G - J.
IECEx Certificate No. IECEx BAS 06.0014X. For sizes Os - F.
IECEx Certificate No. IECEx BAS 06.0013X. For Sizes G - J.
Suitable for use in Zone 1, Zone 2, Zone 21 and Zone 22.
Suitable for use in Gas Groups IIA, IIB and IIC.
Construction and Test Standards: IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15, IEC/EN 61241-0 and IEC/EN 61241-1.
Ingress Protection: IP66, IP67 and IP 68 （30 metres for 7 days） to IEC/EN 60529 and NEMA 4X.
Deluge Protection to DTS01.
Operating Temperature Range: -60°C to +80°C.
Alternative certification options available:
Exe II. Certificate No. 1015065 （LR 78713-7）.
BR-Exd IIC/Exe II. Certificate No. CEPEL 01.0063X.
GOST R-Exe IIU.
Exd IIC/Exe II.
GOST K - Approved for use in Kazakhstan.
Marine Approval. Certificate No. 06-LD135893-PDA.
Marine Approval
RINA Certificate No. ELE030710CS

 

Hawke 501/453/Universal Cable Gland

CABLE GLAND SELECTION TABLE
Size Ref.	Entry Thread Size			Thread Length ‘H’	Cable Acceptance Details						‘G’ Compressed Length	Hexagon Dimensions
					Inner Sheath ‘A’		Outer Sheath ‘B’		‘C’ Armour/Braid
	Metric	NPT *										Across Flats	Across Corners
		Standard	Option		Min.	Max.	Min.	Max.	Orientation 1	Orientation 2
Os	M20 ‡	½"	-	15	3.5	8.1	5.5	12.0	0.8 / 1.25	0 / 0.8	61.6	24.0	26.5
O	M20 ‡	½"	-	15	6.5	11.4	9.5	16.0	0.8 / 1.25	0 / 0.8	61.6	24.0	26.5
A	M20	¾"	½"	15	8.4	14.3	12.5	20.5	0.8 / 1.25	0 / 0.8	63.0	30.0	32.5
B	M25	1"	¾"	15	11.1	19.7	16.9	26.0	1.25 / 1.6	0 / 0.7	69.9	36.0	39.5
C	M32	1¼"	1"	15	17.6	26.5	22.0	33.0	1.6 / 2.0	0 / 0.7	73.2	46.0	50.5
C2	M40	1½"	1¼"	15	23.1	32.5	28.0	41.0	1.6 / 2.0	0 / 0.7	77.9	55.0	60.6
D	M50	2"	1½"	15	28.9	44.4/42.3 †	36.0	52.6	1.8 / 2.5	0 / 1.0	93.5	65.0	70.8
E	M63	2½"	2"	15	39.9	56.3/54.3 †	46.0	65.3	1.8 / 2.5	0 / 1.0	94.0	80.0	88.0
F	M75	3"	2½"	15	50.5	68.2/65.3 †	57.0	78.0	1.8 / 2.5	0 / 1.0	103.0	95.0	104.0
G	M80	3½"	-	20	67.0	73.0	75.0	89.5	2.0 / 3.5	0 / 1.0	90.6	106.4	115.0
H	M90	3½"	-	20	67.0	77.6	75.0	89.5	2.0 / 3.5	0 / 1.0	90.6	115.0	130.0
J	M100	4"	-	20	75.0	91.6	88.0	104.5	2.5 / 4.0	0 / 1.0	90.6	127.0	142.0
All dimensions in millimetres （except * where dimensions are in inches）. Os - F size metric entry threads are 1.5mm pitch as standard. For G size cable glands and above, a 2mm pitch is supplied as standard （1.5mm pitch with 15mm length of thread can be supplied） please specify when ordering. † Smaller value is applicable when selecting reduced NPT entry option. ‡ Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm.

Alternative Reversible Armour Clamping Ring （RAC）

SELECTION TABLE
Size Ref.	Steel Wire Armour/Braid/Tape
	Orientation 1	Orientation 2
B	0.9 / 1.25	0.5 / 0.9
C	1.2 / 1.6	0.6 / 1.2
C2	1.2 / 1.6	0.6 / 1.2
D	1.45 / 1.8	1.0 / 1.45
E	1.45 / 1.8	1.0 / 1.45
F	1.45 / 1.8	1.0 / 1.45

Ordering Information

Cable Gland Type/Size/Thread
e.g. 501/453/UNIV/C/M32
501/453/UNIV/C/1¼" NPT

Ordering Information with Alternative Clamping Ring

Cable Gland Type/Size/Thread/AR
e.g. 501/453/UNIV/C/M32/AR
501/453/UNIV/C/1¼" NPT/AR