詳情：
True Primary Standard (NIOSH) accuracy and performance validation for sampling pump air flows from 1 cc/min to 30 LPM The Gilibrator-2 System provides users with a convenient and highly automated way to check almost any commercially available air sampling pump for proper air flow function before deployment. The system consists of an electronic Gilibrator-2 Base which is used with any of three sizes of wet bubble cells. These patented interchangeable components are also available as part of kits which can also include a complete calibration diagnostic panel. All cells use a twist-on bayonet design for quick and easy mounting to the base. All are certified for accuracy and traceable to NIST. Calibration CellsThree bubble cells are available, for air flow ranges of 1 to 250 cc/min (low flow cell), 20 cc/min to 6 LPM (standard flow cell) and 2 to 30 LPM (high flow cell). These interchangeable wet cells generate perfect bubble films at the touch of a button. An infrared sensor reads the bubble flow rate, which is then calculated and displayed. Gilibrator-2 Base Easy to operate, microprocessor-controlled unit features simple on/off and reset touchpad with large LCD screen that displays flow rate, the calculated average of multiple flow samples in a series and the sample number. Light in weight, it operates with either AC power or rechargeable batteries (8 - hour life) for easy portability in either the lab or the field. Gilibrator-2 Diagnostic KitOffers the industrial hygienist a complete, portable calibration laboratory. Consists of Gilibrator-2 Base with three wet bubble cells in a cushioned carrying case, with a full diagnostic panel built into the top lid of the case. The panel uses an interchangeable rotameter design for 2 to 5,000 cc/min flow capability and will run any of several diagnostic tests: "Load" simulation - Offers two load simulations for high and low flows to imitate sample line back-pressures. Back-pressure reading - A built-in Magnehelic® gauge allows visual monitoring of in-line back-pressures up to 40" H2O (10 kPa). Leak checking - Built-in Magnehelic® gauge allows visual leak testing and monitoring capabilities. Pump flow adjustment - Rotameters allow instant visual indication of approximate flow rates, assisting in properly adjusting air flows. Optional PC Interface Kit & PrinterA PC Interface Kit is available for real-time data download and manipulation. The kit includes a cable for connecting a computer to the RS-232 port of the Gilibrator-2 Base, as well as software that allows the user to log pump and calibrator serial numbers, data, operator name, flow rates, averaging data, number of samples, sample sequence, and standard deviation data. An optional printer is available for hard copy printouts of calibration data. Gilibrator-2 SpecificationsLow Flow Cell
Dimensions: 2W x 4H x 2.1"D (51W x 102H x 53mmD)
Weight: 0.4 lbs. (.18 kg) Standard Flow Cell
Dimensions: 2.5W x 6H x 2.6"D (64W x 152H x 66mmD)
Weight: 0.82 lbs. (0.37 kg) High Flow Cell
Dimensions: 3.5W x 8.1H x 3.7"D (89W x 206H x 94mmD)
Weight: 2.26 lbs. (1.02 kg) Flow Range, Accuracy
Low Flow Cell, 1 - 250 cc/min, ±1% of reading accuracy;
Standard Flow Cell, 20 cc/min to 6 LPM, ±1% of reading accuracy;
High Flow Cell, 2-30 LPM, ±1% of reading accuracy. Temperature Limits
Operating Temperature: 5° to 35°C (41° to 95°F);
Storage Temperature: 0° to 50°C (32° to 122°F) Electrical
DC Power Source: Internal Battery Pack;
AC Power Source: Continuous operation through adapter/charger;
Battery Charge Time:14 Hrs.;
Expected Battery Life: over 300 charge/recharge cycles;
Transmission Link: RS-232;
Interface Connectors: Charger Jack (2.1mm barrel jack), Printer Jack (DB-25), SensorJack - Wet Cell (DB-9) | 會員1.png)
QQ:2568841715
澳门|
松溪县|
泽普县|
萝北县|
乌海市|
乌海市|
田东县|
全南县|
万宁市|
大化|
蒙阴县|
乌鲁木齐县|
宁陕县|
汉川市|
藁城市|
延吉市|
榆社县|
阜宁县|
修水县|
铜鼓县|
巢湖市|
蒙山县|
弋阳县|
宜兴市|
扎赉特旗|
黑龙江省|
青海省|
衡阳县|
普宁市|
观塘区|
宁阳县|
屏东县|
惠州市|
沁源县|
鲁山县|
漾濞|
迭部县|
溧水县|
华蓥市|
苗栗县|
霞浦县|