玻璃柱測定蒎酮酸
玻璃柱測定蒎酮酸 詳細信息:
名稱:填充柱
規格:2m*3mm
型號:HH-Pinonic acid
:對β-蒎烯氧化制備諾蒎酮的合成工藝進行優化,探討了反應時間、反應溫度、催化劑類型及用量、氧化劑類型及用量和溶劑種類等因素對反應轉化率和選擇性的影響。研究結果顯示:5.00 g β-蒎烯,3 mL 2 mol/L H_2SO_4,反應時間為3 h,反應溫度為21~24℃,催化劑為十六烷基三甲基(CTAB),用量0.20 g,氧化劑為,n()∶n(β-蒎烯)為3.2∶1,溶劑為丙酮,在機械攪拌條件下,諾蒎酮合成反應的轉化率達99.5%,選擇性高達92.2%。
浩瀚色譜(山東)應用技術開發有限公司,,采用填充柱,氫火焰檢測器,面積歸一法測定蒎酮酸的純度及雜質的含量,柱效高,分離好,結果滿意。
玻璃柱測定蒎酮酸 測試譜圖:
Determination of pino
nic acid with glass column
Determination of pino
nic acid with glass column Details:
Name: Packed column
Specification: 2m*3mm
Model: HH-Pino
nic acid
: The synthesis process of β-pinene oxidation to prepare nopinene was optimized, and the influence of reaction time, reaction temperature, catalyst type and dosage, oxidant type and dosage, and solvent type on the reaction co
nversion rate and selectivity were discussed. The results of the study showed: 5.00 g β-pinene, 3 mL 2 mol/L H_2SO_4, reaction time 3 h, reaction temperature 21-24℃, catalyst is cetyltrimethylammo
nium bromide (CTAB), dosage 0.20 g, oxidant is potassium permanganate, n (potassium permanganate): n (β-pinene) is 3.2:1, solvent is acetone, under mechanical stirring conditions, the co
nversion rate of nopinone synthesis reaction reaches 99.5 %, the selectivity is as high as 92.2%.
Haohan Chromatography (Shandong) Applied Technology Development Co., Ltd. keeps pace with the times. It uses a packed column, a hydrogen flame detector, and an area normalization method to determine the purity and impurity co
ntent of pino
nic acid. The column efficiency is high, the separation is good, and the results are satisfactory.
Glass column determination of pino
nic acid test spectrum: