Rt®-Alumina BOND/Na2SO4 Columns （fused silica PLOT）
（Na2SO4 deactivation）
Guaranteed Reproducibility
Each Rt®-Alumina BOND column is tested with a hydrocarbon test mix to ensure proper phase thickness and selectivity. 1,3-Butadiene is used to calculate k （capacity factor）, which is a measure of phase thickness. Selectivity is measured using retention indices for propadiene and methyl acetylene. The resolution of trans-2-butene and 1-butene is also verified. To measure coating efficiency, plates per meter are checked using 1,3-butadiene.
With our new technology, both Na2SO4 and KCl are available with the Rt®-Alumina BOND columns.
Similar Phase（s）:
GS-Alumina, HP PLOT S, HP PLOT M, Alumina-PLOT, AT-Alumina, CP-Al2O3/NA2SO4
| catalog # | length | id | df | units | |
| 19757 | 30m | 0.32mm | 5μm | ea. |
|
| 19758 | 50m | 0.32mm | 5μm | ea. |
|
| 19755 | 30m | 0.53mm | 10μm | ea. |
|
| 19756 | 50m | 0.53mm | 10μm | ea. |
|
Showing 1 to 4 of 4 entries
1. Highly selective for C1-C5 hydrocarbons; separates all unsaturated hydrocarbon isomers above ambient temperatures. 2. Reactivity of aluminum oxide stationary phase is minimized so that column response for polar unsaturates, such as dienes, is optimized. Column sensitivity or response ensures a linear and quantitative chromatographic analysis for these compounds. 3. Strong bonding prevents particle generation. The column can be used in valve switching operations, without release of particles that can harm the injection and detection systems. 4. The Rt®-Alumina BOND column is stable up to 200 °C. If water is adsorbed on the column, it can be regenerated by conditioning at 200 °C. Full efficiency and selectivity will be restored. 5. High capacity and loadability give exceptionally symmetric peaks; ideal for volatile hydrocarbon separations at percent levels, as well as impurity analyses at ppm concentrations.
Guaranteed Reproducibility Each Rt®-Alumina BOND column is tested with a hydrocarbon test mix to ensure proper phase thickness and selectivity. 1,3-Butadiene is used to calculate k （capacity factor）, which is a measure of phase thickness. Selectivity is measured using retention indices for propadiene and methyl acetylene. The resolution of trans-2-butene and 1-butene is also verified. To measure coating efficiency, plates per meter are checked using 1,3-butadiene. Extensive testing assures reproducible retention times and predictable flow behavior column-to-column.
Acetylene/propadiene elute after butanes （impurities in acetylene/propadiene）.
Best separation for butene isomers （impurities in butene streams）.
Methyl acetylene elutes after 1,3-butadiene.
Cyclopropane （impurity in propylene） elutes well before propylene.
會(huì)員1.png)
QQ:2568841715
宽甸|
太和县|
凤山市|
盘山县|
岑溪市|
九寨沟县|
南岸区|
玛沁县|
锡林郭勒盟|
合川市|
乐昌市|
宁明县|
凯里市|
崇义县|
呼伦贝尔市|
柞水县|
大化|
七台河市|
黔西|
新宁县|
巨野县|
五大连池市|
临海市|
丰城市|
宜君县|
新平|
靖江市|
磐石市|
禹城市|
白河县|
郑州市|
嘉定区|
东源县|
新和县|
贵定县|
印江|
潞西市|
营口市|
漳平市|
保德县|
青阳县|