模切部功能：

1、膠墊輥機械螺旋式橫向移動，移動距離為50mm。

2、模切輥相位采用PLC及電動數字式360°調整，停機及運轉情況下均可調整。(也可選用PLC及觸摸屏調整)

3、模切輥橫向移動采用PLC及電動數字輸入式調整，調整范圍±10mm。

(也可選用PLC及觸摸屏調整)

4、膠墊輥與模切輥間隙調整采用自鎖結構，并配有氣缸大范圍快速調整，減少膠墊損壞，增加膠墊使用壽命。

5、送紙輥間隙調整采用自鎖結構。

6、速度補償裝置，可使優力膠輥隨模版輥滑動，從而使膠墊輥的表面速度由刀模控制，使模切的紙箱與刀模形狀*一致。

7、機器配有優力膠修正裝置，可對優力膠反復多次修整后使用。

8、模切輥圓周軸向可選做T型槽，用散模切版拼裝而成代替整張模版，節約作普通箱的制版費用。

Function of Die Cutting Department:

1.The rubber roller adopt mechanical control the position move left and right. The movement distance is 50mm.

2.The phase of the die-cutting unit adopt PLC and electric 360°adjust, accord the error to input the adjust data, can be adjusted while the machine running or stop.(PLC with touch screen adjustment as an option)

3.The horizontal moving of the die roller adopt PLC and electric adjustment, input the adjust data accord the error, adjusting distance is 10mm.(PLC with touch screen adjustment as an option)

4.The space adjustment between rubber roller and die roller adopt self-locking structure, with cylinder big scope quickly adjust, decrease the rubber wear, increase the rubber life.

5.The space adjustment between the feed rollers adopt self-locking structure.

6.The unique speed compensation device can make the rubber roller rolling running with the die roller, make the surface speed of the rubber cushion is completely controlled by the die roller, the shape of the carton sheet will absolutely equal to the die pattern.

7.There is a rubber repair device with the machine, the rubber can be used after be repaired.

8.Die-cutter roller can choose T-type groove, use the part die-cutter mould together to instead of the whole mould,to save the mould-making fee.