M-200橡膠塑料摩擦磨損試驗機

（北京北廣精儀儀器設備有限公司，所有設備保修兩年，終身售后服務。）

橡膠塑料摩擦磨損試驗機技術參數：

1、試樣尺寸： 30mm×7mm×6mm
2、轉動速度： 0-500轉/分 （可調）
3、負 荷： 196N ± 0.1%（可增至392N）
4、摩擦環尺寸：￠40×10mm ，倒角0.5×45°，外圓表面與內圓同心度偏差小于0.01 
5、摩擦環材質：45號鋼,淬火,熱處理HRC40-45,外圓表面光潔度▼8
6、摩擦力矩： 0--4N·m 
7、砝碼重量：4KG砝碼一件，1KG砝碼4件，可實現重量疊加功能。

精度：
1、速度精度：1%
2、負荷精度：0.5%
3、摩擦力矩精度：1%
4、計數器精度：1S
5、傳感器測量精度：1% FS

符合標準：GB/ T3960-1983塑料滑動摩擦磨損試驗方法 GB/T9141.8-1999柔性石墨板材滑動摩擦系數測試方法 適用于塑料制品、橡膠制品、石墨板材或其他復合材料的滑動摩擦，磨損性能測試，也可對試驗中試樣的磨擦力、磨擦系數和磨損量進行測定。 本儀器融合了當前的智能電路系統進行控制，并結合老式M-200摩擦磨損試驗機的功能進行升級改造而成，本儀器具有測控精度高，操作便捷等優勢，是科研院所、質檢機構、實驗室研究*的試驗設備。 M-200型摩擦磨損試驗機主要由試驗主機及智能控制系統兩大部分構成，通過微機控制系統進行操作試驗，在試驗過程中同時可以顯示數值、扭矩、時間曲線，并可以隨意設定試驗次數，顯示當前試驗數值，設定時間及當前試驗時間等多種功能，隨機配備彩色打印機，可以打印出帶有曲線、表格數據等標準要求的試驗報告。

特點：
1、系統運行穩定，可靠性高。
2、結構緊湊，使用方便，簡單。
3、采用高精度電機、驅動機、傳感器，精度高。
4、具有試驗人員分級管理功能。
5、實時顯示摩擦系數-時間，扭矩-時間曲線。
6、試驗報告可打印試驗參數，試驗數據，曲線，備注等信息，簡單，方便，可編輯。

配置及附件：
1、試驗主機一臺
2、高精度扭矩傳感器一只
3、計算機數據采集卡一塊
4、計算機一臺（品牌）
5、彩色激光噴墨打印機一臺
6、計算機控制軟件一套
7、4Kg 砝碼兩件（備用一套）
8、標準磨擦環四件（備用兩件）
9、產品使用說明書一份
10、產品合格證
11、產品裝箱單一份
12、整機重量：約87 公斤

Technical parameters:

1, the sample size: 30 mm x 7 mm x 6 mm

2, the rotation speed: 0-500 revolutions per minute (adjustable)

3, negative charge: 196 n + / - 0.1% (can be increased to 392 n)

4, friction ring size: 40 x 10 mm, ￠0.5 x 45 ° chamfer, cylindrical surface and inner circle concentricity deviation is less than 0.01

5, friction ring material: 45 # steel, quenching, heat treatment HRC40-45, cylindrical surface finish ▼ 8

6, the friction torque: 0-4 n. m

7, weight weight: 4 kg weight, 1 kg weight 4 pieces, superposition of weight function can be realized.

Accuracy:

1, speed accuracy: 1%

2, the accuracy of load: 0.5%

3, the friction torque accuracy: 1%

4, counters, precision: 1 s

5, sensor measurement accuracy: 1% FS

Conform to the standards: GB/T3960-1983 plastic sliding friction and wear test method of GB/T9141.8-1999 flexible graphite plates sliding friction coefficient test method is suitable for the plastic products, rubber products, graphite plates or other composites sliding friction, the wear performance test, can also be used to test the sample of friction, friction coefficient and wear volume was measured. The instrument combines the latest inligent control circuit system, and combined with the function of the old M - 200 friction and wear testing machine upgrading, this instrument has high control precision, the advantages of the operation is convenient, is a scientific research institutes, quality inspection institutions and laboratories research preferred test equipment. M - 200 type friction and wear testing machine is mainly composed of host and inligent control system of two parts, through the microcomputer control system operating experiment was carried out, in the process of test curve can display the numerical, torque and time at the same time, and are free to set the number of test, display the current test values, setting time and the test time and so on a variety of functions, random equipped with color printer, you can print out with curve, such as table data standard test report.

Features:

1, the system runs stably and high reliability.

2, compact structure, easy to use, simple.

3, motor, drive, sensor with high precision, high precision.

4, with functions of test personnel hierarchical management.

5, the friction coefficient in real time - time, torque - time curve.

6, test report can be printed test parameters, test data, curve, note the information such as, simple, convenient, and can be edited.

The main configuration and accessories:

1, test host

2, a high precision torque sensor

3, computer data acquisition card

4, a computer (brand)

5, color laser inkjet printer

6, a set of computer control software

7, 4 kg weight in two (a back-up)

8, standard friction ring four pieces (spare two)

A 9, product specification

10, product certification

11, the product packing list in duplicate

12, the weight: 87 kg