1..This machine uses fully automatic servo motor with computer digital
function to control length, it is easy for operation.
The produced one is very tight and fast at the seals,it apparently shows
a good quality.

2.制作過程從整卷原料、自動封邊、割邊、穿條、貼合、超音波壓扁、印刷電眼、沖孔、熱切斷、自封計數，全部過程采用全自動作業。

2.Flow process of production is from rolled material through automatic
edge alignment,edge trimming, strip piercing,laminating,ultrasonic
compressive embossing,photo cell sensing,hole punching,thermo cutting off
and ends with automatic counting,all of the operations are fully automatic.

3.本機附有無料自動停機設備、印刷電眼失效自動停車設備、溫度不夠自動停車等設備

3..This machine equips automatic stop equipment,it will work to stop the
machine when it is running out of material supply or when photo cell is
out of order or when temperature is losing down and below the minimum
required.

主要技術參數：

Main Technical Parameters:

型號 Model 　 JY-600	JY-800
適用原料Material LDPE-0PP-PE	LDPE-0PP-PE
產量 Output 　 50~150 （Cycle/min）	50~130 50-130（Cycle/min）
制袋寬度Max.cutting width 100~500 mm	120~600 mm
制袋長度 Max.cutting length 120~600 mm	150~800 mm