![]() |
For its elastomer two shear beams is adopted, which is supported by two hinges in both ends and it has good ability for resisting slanting and twisting load. It is suitable for electronical hopper scales and drum-filling scales especially in chemical factory and fodder factory. It can provide bound force for scale body and allow three-dimension displacement. Nickel Plating is used for surface that is bright and resistant rust. Multi-layers pouring pastern sealing is used and consistent with IP-67 sealing standard. The load cell can be reciprocated with 65016 type load cell produced by STS (USA).
量程范圍(Scaling Range [pound]):
1k, 1.5k, 2k, 2.5k, 3k, 5k, 10k, 15k, 20k, 25k, 50k, 75k(LB)
[t]:0.5, 0.75, 1, 1.5, 2.5, 5, 7.5, 10, 25, 35
材質(Material): 合金結構鋼
技術指標(Technical Specification):
| 技術參數 Technical parameter | 單位 Unit | 技術指標 Specification |
| 輸出靈敏系數Sensitivity | mV/V | 3±0.0075 |
| 綜合誤差Synthetical error | % F.S | 0.03 |
| 重復性Repeatability | % F.S | 0.01 |
| 蠕變Creep(20min) | % F.S | 0.03 |
| 零點恢復Zero recover(20min) | % F.S | 0.03 |
| 零點輸出Zero balance | % F.S | ±1 |
| 零點溫漂Temp. Effect on zero signal | % F.S /10℃ | 0.026 |
| 靈敏系數溫漂Temp. Effect on sensitivity | % F.S /10℃ | 0.015 |
| 溫度補償范圍Temp. Compensation range | ℃ | -10 ~ +65 |
| 安全溫度范圍Safe temp. range | ℃ | -20 ~ +70 |
| 輸出阻抗Output resistance | Ω | 700±2 |
| 輸入阻抗Input resistance | Ω | 770±10 |
| 絕緣電阻Insulation resistance | MΩ | >5000 |
| 推薦激勵電壓Nominal excitation voltage | V DC/AC | 10 |
| 激勵電壓Max. Excitation voltage | V DC/AC | 15 |
| 安全過載Safe load limit | % F.S | 150 |
| 極限過載Breaking load | % F.S | 300 |
| 電纜長度Cable length | M(四芯屏蔽電纜) | 7.5(或根據用戶要求) |
紅——輸入(+);黑/蘭——輸入(-);綠——輸出(+);白——輸出(-)。
Red—Input(+);Black/Blue——Input(-);Green—Output(+);White—Output(-)
其他說明(Note):
可按用戶要求量程和外形尺寸供貨。
We can supply according to scaling range and shape dimension required by users.
外形安裝尺寸(Mounting Dimension):
| 尺寸 量程 | A | B | C | D | E | F | G |
| 1k~5kLB 500kg~2500kg | (inch)0.50 (mm)12.7 | 1.25 31.8 | 1.25 31.8 | 1.25 31.8 | 7.50 190.5 | 6.25 158.8 | 1.12 28.5 |
| 10k~25kLB 5000kg~10000kg | (inch)0.81 (mm)20.6 | 2.00 50.4 | 1.44 36.6 | 1.94 49.3 | 8.75 222.3 | 7.50 190.5 | 1.62 41.2 |
| 50k~75kLB 25000~35000kg | (inch)1.31 (mm)33.3 | 3.00 76.2 | 2.44 62.0 | 2.94 74.7 | 13.50 343 | 11.50 292.1 | 3.25 82.6 |
![]() |







陇南市|
浮梁县|
颍上县|
额尔古纳市|
阜阳市|
安乡县|
天门市|
化州市|
陆丰市|
炉霍县|
枝江市|
湖南省|
绥棱县|
额济纳旗|
莲花县|
达拉特旗|
正镶白旗|
星子县|
治县。|
普陀区|
乌拉特后旗|
芮城县|
贡山|
射洪县|
开化县|
甘泉县|
铜山县|
贵阳市|
和顺县|
防城港市|
宁城县|
大渡口区|
莱芜市|
大姚县|
图们市|
新竹县|
平原县|
丹寨县|
正镶白旗|
济源市|
江达县|